The TX Ranger is a hand-held Time Domain Reflectometer (cable fault locator) with a first range of 2.5 meters combined with a 1.3 Nano second pulse width gives a blind zone of only 5 cm, it makes this the ideal product for fault location on short cable assemblies and harnesses. Small and intermittent faults can be easily identified by using the selectable gain control allowing trace amplification of up to 7 times and when set to scan lock mode the advanced noise reduction software may be selected allowing the user to select between 8,16 and 32-point trace averaging further enhancing the clarity of the trace by reducing electrical and environmental interference.

With an onboard storage capacity of up to 50 traces including time/date, impedance, Velocity of Propagation, cursor position, range and gain value. These may be recalled and used for comparison with current cables under test or downloaded to the PC via the USB link and TRACEXTRA PC software provided. Historical data stored on the PC may also be uploaded to the Ranger for comparison with current measurements.

Features

• USB 2.0 Interface with a Windows compatible software TraceXtra to download/analyse traces
• Rugged Palm-Top design
• Weighs less than 350g (12oz)
• 11 Measurement Ranges up to 6000m (6km)
• 25, 50, 75 & 100ohm Selectable Cable Impedance
• Memory capacity up to 50 saved traces
• Built in Tone Generator for Pair Tracing and Identification
• Suitable for testing all Communication and Power Cables
• Environmental Protection IP54
• CE Approved
• Soft bag & Test Leads