WLD2 is a WiFi / Ethernet water leak detector with support for WWW, SNMP, e-mails, and PoE. Alarms are triggered by even the smallest volumes of liquid that touch the WLD sensing cable anywhere along its length, such as condensation from A/C pipes or general water leaks. You will receive alarms before costly damages occur. In addition to water alerts, the device also detects disconnected or damaged sensing cables for increased reliability.

WLD2 supports zone creation: up to 4 WLD zone inputs for external WLD detecting cables can be connected to the unit to help locate the leak more accurately. A different phone number can be called for each zone.

Thanks to WiFi connectivity, the WLD2 water leak detector can be installed in remote places. In case of flooding, it can send an alert via e-mail, SNMP Trap, or the SensDesk cloud. With an external SMS gateway by HW group, it can send a text message or dial a phone number. In critical applications, it can also communicate via wired Ethernet and can be powered with PoE.

WLD2 can be connected to the SensDesk portal, as well as to standard monitoring systems thanks to SNMP and SNMP Trap support. Water occurrence can also be signaled by switching a remote output (e.g. to start a siren) over the network (Box-2-Box mode with a Poseidon2 or Damocles2 unit), independently for each sensing cable.

SensDesk Technology completes the HWg monitoring ecosystem (sensors + devices + SensDesk Technology portal) and provides long-term reliable alerts, graphs, PDF reports, open API, remote device management, and more.

The right water detection and early alert are essential in many businesses, such as data centers. The Water Leak Detection System from HW group is a complete solution designed to protect your facility against costly water damage.

Features:

• Intuitive WWW interface for fast and easy installation.
• Support for automatic network configuration via DHCP.
• Ability to communicate over WiFi (external antenna for extended range, 2.4GHz 802.11 b/g/n) and Ethernet simultaneously.
• Up to 4 detection zones (each max. 185m), making leak source identification easier.
• WLD2 signals the following states: OK / Flooded / Sensing cable fault.
• Flooding alerts can be sent via standard e-mail, or as SMS through an external SMS gateway.
• Detected leaks or sensing cable disconnections can be signaled by activating a relay output at a Poseidon2 or Damocles2 unit over Ethernet.
• Easy wall-mounting or installation in a 19″ cabinet.
• Powered over PoE or via an external adapter.

Applications and usage:

• Water detection under raised floors.
• Leaky pipe detection (cable wrapped along the pipe).
• Protection against floods from skylights – sensing cable routed along walls.
• Detection of water leaks in drip trays.
• Detection of water leaks under air-conditioning outlets.